Conditioning is essential to the granulating or puffing process. Without a good conditioning system, there will not be a good granulating or puffing effect and there will be many factors that affect the quality of the tuner, this mainly depends on the following three factors.

A few key points to be wary of when operating a granulating machineMain operation points of granulator:(1) the particle size of the powder has a certain proportion;(2) Purpose of feed adjustment: a. Improves production efficiency; B. Extends the service life of the ring-die;

Six crucial points regarding the upkeep and maintenance of the bi-axial blade mixer The bi-axial blade mixing machine is widely used in the feed, food, chemical production industries, powdered medicine and pesticide industries,

Cleaning methods for different pieces of feed mill production equipment (Part 2)The cleaning methods of different pieces of feed mill production equipment are described in the previous document, and the cleaning method of the other five pieces of equipment will be discussed in this document.

Cleaning methods for different pieces of feed mill production equipment (Part 1)Equipment cleaning is somewhat of a headache for the feed mill, especially if you are running a busy factory.

Due to problems regarding the processing arrangement and operating technology of the granule machine, the output is unable to meet its expected design requirements.

The hammer feed mill is a machine that uses a high-speed rotating hammer to crush feed.

The ring die is the key component of the pellet mill and is the most likely part of the pellet mill to suffer from wearing.

Tempering is a machine process for carrying out heat treatment on the powdered materials before pellet feed is granulated.

Seven steps of feed manufacturing：: raw material receiving, cleaning, grinding, proportioning, mixing, forming and measurement packing. Grinding is one of the most important process.