The rotary grading sieve is an indispensable piece of equipment in the modern feed production process. It is widely used in feed mills. During production, when some users are not operating and maintaining the equipment enough, there will be some problems.
Methods for controlling the moisture content of pellet feedThere are two kinds of solutions for real-time on-line moisture detection and control technology of pellet feed. One is feedback control, which is online testing of the water content in the feed after cooling.
Studies on the control of moisture detection in pellet feed(Part One) 1. Factors that influence the moisture content of pellet feedDuring the production of pellet feed, the water content in the finished product that will be affected by crushing, conditioning as well as other liquid additives;
Eight ways to improve the production efficiency of the granulatorWith the development of livestock, aquaculture and improvement of industrial feed technology, pellet feed production has been commonplace in feed mills. The primary equipment in the pellet feed production process is the granulator.
The operation mode of pellet feed machinery is also crucial to the life span of the equipment. Check the connections of each site according to the rules of operation before use. Add a proper amount of clean lubricating oil to the running area.
Brief analysis on the addition of small material into the feed production process Small materials in the process of feed processing generally refers to the content that make up less than 1% of the feed and need to be separated when weighing of trace elements such as vitamins, amino acids, drugs, att
Focusing on the cooling process and ensuring the quality of the pellet feed The pellet feed cooling section is required to ensure that the moisture content of the granule feed meets safe storage requirements after cooling. Aside from the method of controlling the moisture content of pellet feed effe
Granulation is an important part of the granule feed process and the factors affecting the granulation are analyzed in this paper.1.Adding steamThis is one factor that is more difficult to control during the granulation process and is one of the most important factors to determine the cost,
Conditioning is essential to the granulating or puffing process. Without a good conditioning system, there will not be a good granulating or puffing effect and there will be many factors that affect the quality of the tuner, this mainly depends on the following three factors.
A few key points to be wary of when operating a granulating machineMain operation points of granulator:(1) the particle size of the powder has a certain proportion;(2) Purpose of feed adjustment: a. Improves production efficiency; B. Extends the service life of the ring-die;
Six crucial points regarding the upkeep and maintenance of the bi-axial blade mixer The bi-axial blade mixing machine is widely used in the feed, food, chemical production industries, powdered medicine and pesticide industries,
Cleaning methods for different pieces of feed mill production equipment (Part 2)The cleaning methods of different pieces of feed mill production equipment are described in the previous document, and the cleaning method of the other five pieces of equipment will be discussed in this document.
content is empty!