Products News
- Brief analysis on the addition of small material into the feed production processBrief analysis on the addition of small material into the feed production process Small materials in the process of feed processing generally refers to the content that make up less than 1% of the feed and need to be separated when weighing of trace elements such as vitamins, amino acids, drugs, attProducts News September 06, 2017
- Focusing on the cooling process and ensuring the quality of the pellet feedFocusing on the cooling process and ensuring the quality of the pellet feed The pellet feed cooling section is required to ensure that the moisture content of the granule feed meets safe storage requirements after cooling. Aside from the method of controlling the moisture content of pellet feed effeProducts News August 28, 2017
- A brief introduction to varying feed granulation factorsGranulation is an important part of the granule feed process and the factors affecting the granulation are analyzed in this paper.1.Adding steamThis is one factor that is more difficult to control during the granulation process and is one of the most important factors to determine the cost,Products News August 21, 2017
- Three important factors that might affect material qualityConditioning is essential to the granulating or puffing process. Without a good conditioning system, there will not be a good granulating or puffing effect and there will be many factors that affect the quality of the tuner, this mainly depends on the following three factors.Products News August 14, 2017
- The use of pellet feed machinery equipmentThe operation mode of pellet feed machinery is also crucial to the life span of the equipment. Check the connections of each site according to the rules of operation before use. Add a proper amount of clean lubricating oil to the running area.Products News September 20, 2017
- Studies on the control of moisture detection in pellet feed(Part One)Studies on the control of moisture detection in pellet feed(Part One) 1. Factors that influence the moisture content of pellet feedDuring the production of pellet feed, the water content in the finished product that will be affected by crushing, conditioning as well as other liquid additives;Products News October 23, 2017
- Studies on the control of moisture detection in pellet feed (PART TWO)Methods for controlling the moisture content of pellet feedThere are two kinds of solutions for real-time on-line moisture detection and control technology of pellet feed. One is feedback control, which is online testing of the water content in the feed after cooling.Products News November 02, 2017
- The Operation and Maintenance of the Rotary SieveThe rotary grading sieve is an indispensable piece of equipment in the modern feed production process. It is widely used in feed mills. During production, when some users are not operating and maintaining the equipment enough, there will be some problems.Products News November 15, 2017
- Eight Ways To Improve The Production Efficiency Of The GranulatorEight ways to improve the production efficiency of the granulatorWith the development of livestock, aquaculture and improvement of industrial feed technology, pellet feed production has been commonplace in feed mills. The primary equipment in the pellet feed production process is the granulator.Products News September 29, 2017
- A few key points to be wary of when operating a granulating machineA few key points to be wary of when operating a granulating machineMain operation points of granulator:(1) the particle size of the powder has a certain proportion;(2) Purpose of feed adjustment: a. Improves production efficiency; B. Extends the service life of the ring-die;Products News August 03, 2017